These are the lower brackets only from the Full Normal Kit. These are for the people that don’t feel a need for the upper reinforcement bracket and just want the lower brackets. This kit requries the factory LCA but can be used with aftermarket UCAs. No welding required!

Brackets can be used with the stud bushing option for more travel or for more drop. The stud bushing option allows 2″ more of maximum drop. Overall kit is good from 7″ of drop to 4″ of lift.

If you need or want help selecting the right coilover shock and spring for your application, please measure like the picture with the truck on the ground at the ride height you want. Use a jack under the front frame to raise the truck if you want more lift than you currently have and measure there. The measurement is from the top of the spring shock pocket to the middle of the LCA bolt.

Can be used for any GM 99-07 1500 4WD truck/suv that uses factory torsion bars (includes silverado, sierra, tahoe, yukon, yukon XL, suburban, escalade, denali, and denali XL). Normal application is bolt-on for the upper brackets, but can be welded if you desire. Will not work on 2500/2500HD trucks!

Kit Includes:

• Lower Brackets
• Powdercoating
• Hardware
• Spacers

For more in depth write up and installation instructions, see the PDFs below:

Downloads

Coilover Info and Installation Guide