These are heavy duty Poly motor mounts that fit 2019-2026 GM T1xx GM LT-equipped trucks including Silverado, Sierra, Tahoe, Yukon, Yukon XL, Suburban, Denali, Escalade, etc. They are a direct bolt up using factory hardware. These are laser cut 3/16″ steel fully MIG welded. All brackets will ship raw ready for your paint or painted depending on the options selected above. They match factory measurements so the engine remains in the same location as stock.

Sold as a pair only since the driver side and passenger side are different. The driver side is the more symmetrical one of the pair.

These are designed, manufactured, made with 100% USA materials by some guy in Alabama. Roll Tide.  Any imitations you see without the AFP logo are NOT authentic and will likely not work or fit correctly. I designed these from a high-resolution scan of a stock mount to make sure they mount correctly and without issues.

Installation note:
Do not overtighten the main center bolt. It uses a locking nylon nut and will not back off. Overtightening can compress the mount which may result in an increase in vibration. Snug is fine so the gap between the poly bushing and tabs is taken up, roughly 22ftlbs. The mounts are different left to right. The right (driver) side is more symmetrical than the passenger side.

Note for SUVs: These generally work for 2021-2026 GM SUVs like Tahoe, Yukons, Suburbans, etc. The 19-26 name is based on the truck years.