These are SOLID motor mounts that fit 2009-2026 F-150 and Raptor-R trucks with the 5.0 Coyote. They are a direct bolt up using factory hardware. These are laser cut 3/16″ steel fully MIG welded. All brackets will ship raw ready for your paint or painted depending on the options selected above. They are steel so will need to be painted, powdercoated, or sealed to prevent rusting. They match factory measurements so the engine remains in the same location as stock. Sold as a pair only since the driver side and passenger side are different. These are a solid piece of steel, there is nothing to wear out or need to be replaced. Combined they weigh 8.29lb which is nearly a 20lb weight savings over stock mounts.

These are designed, manufactured, made with 100% USA materials by some guy in Alabama. Roll Tide.  Any imitations you see without the AFP logo are NOT authentic and will likely not work or fit correctly. I designed these from a high-resolution scan of a stock mount to make sure they mount correctly and without issues.

Note: These are solid mounts so some additional engine feedback is to be expected. Any mechanical issues will become much more obvious. Knock sensors may need to be tuned to compensate.