This is a bolt-in harness bar for 99-06 GM trucks. It is designed to be used with my seat brackets and will fit all existing normal height and short seat brackets I have made over the last several years. It is designed to redirect the shoulder straps straight back from the passenger instead of going straight to the seat brackets. This is not a full cage and does not offer any rollover protection. All brackets are laser cut steel. Heim joints are TIG welded to support bars and other brackets are MIG welded.

This is a bolt-in kit and requires minimal modification (cut a 1″ by 3″ slot in the plastic behind the doors is all). No drilling, welding, or cutting of metal is required. Ships raw (not painted) via Fedex.

Kit consists of:

1x 1.75″ DOM Main Bar

4x 1.125″ DOM Support Bars

8x 16k lb cyro treat 1/2″ heim joints

2x 3/16″ Side Support Brackets

2x 3/16″ and 1/4″ Floor Brackets

All necessary Grade 8 1/2″ hardware

Misc spacers as needed

Please watch the video in this listing for more details and helpful installation notes.

This is a large kit with many parts, please allow 3-4 weeks lead time for fabrication.